Menü
Sepetim

S-Bus Kablodan Servo Çıkış Sağlayıcı (A12125)

S-Bus Kablodan Servo Çıkış Sağlayıcı (A12125)
S-Bus Kablodan Servo Çıkış Sağlayıcı (A12125)
Ücretsiz Kargo %11 İndirim
S-Bus Kablodan Servo Çıkış Sağlayıcı (A12125)
S-Bus Kablodan Servo Çıkış Sağlayıcı (A12125)
S-Bus > PWM Terminal (A12125)
S-Bus Kablodan Servo Çıkış Sağlayıcı (A12125)
1.020,20₺ KDV Dahil
1.140,15₺
Vergiler Hariç: 850,17₺
KDV Dahil: 0,00 - 0,00
%5 Havale/EFT İndirimi: 969,19₺
95,79₺'den başlayan taksit seçenekleri
  • Ürün Kodu: P2504
  • Stok: Stokta Var

Taksit Avantajları
VadeAylıkToplam
11020.20₺1020.20₺
2510.10₺1020.20₺
3340.07₺1020.20₺
4262.93₺1051.73₺
6179.10₺1074.58₺
8137.31₺1098.45₺
9124.56₺1121.00₺
1295.79₺1149.46₺
VadeAylıkToplam
11020.20₺1020.20₺
2510.10₺1020.20₺
3340.07₺1020.20₺
4262.93₺1051.73₺
6179.10₺1074.58₺
8137.31₺1098.45₺
9124.56₺1121.00₺
1295.79₺1149.46₺
VadeAylıkToplam
11020.20₺1020.20₺
2510.10₺1020.20₺
3340.07₺1020.20₺
4262.93₺1051.73₺
6179.10₺1074.58₺
8137.31₺1098.45₺
9124.56₺1121.00₺
1295.79₺1149.46₺
VadeAylıkToplam
11020.20₺1020.20₺
2510.10₺1020.20₺
3340.07₺1020.20₺
4262.93₺1051.73₺
6179.10₺1074.58₺
8137.31₺1098.45₺
9124.56₺1121.00₺
1295.79₺1149.46₺
VadeAylıkToplam
11020.20₺1020.20₺
2510.10₺1020.20₺
3340.07₺1020.20₺
4262.93₺1051.73₺
6179.10₺1074.58₺
8137.31₺1098.45₺
9124.56₺1121.00₺
1295.79₺1149.46₺
VadeAylıkToplam
11020.20₺1020.20₺
2510.10₺1020.20₺
3340.07₺1020.20₺
4262.93₺1051.73₺
6179.10₺1074.58₺
8137.31₺1098.45₺
9124.56₺1121.00₺
1295.79₺1149.46₺
VadeAylıkToplam
11020.20₺1020.20₺
2510.10₺1020.20₺
3340.07₺1020.20₺
4262.93₺1051.73₺
6179.10₺1074.58₺
8137.31₺1098.45₺
9124.56₺1121.00₺
1295.79₺1149.46₺
VadeAylıkToplam
11020.20₺1020.20₺
2510.10₺1020.20₺
3340.07₺1020.20₺
4262.93₺1051.73₺
6179.10₺1074.58₺
8137.31₺1098.45₺
9124.56₺1121.00₺
1295.79₺1149.46₺

Diğer Kartlar

Tüm kredi ve bankamatik kartları ile tek çekim olarak ödeme yapabilirsiniz.

Kartlar

S-Bus Kablodan Servo Çıkış Sağlayıcı (A12125)

Ürün Bilgileri
Markası:EMCOTEC
Üretici Kodu:A12125
Ürün Türü:S-Bus Kablodan Servo Çıkış Sağlayıcı
Genel Özellikleri
S.Bus terminal block for S.bus surface cables or wing cables (Item no. RF1681, RF1682, RF1683, RF1686, RF1687 or RF1688). This S.Bus terminal block serves to connect conventional analogue and digital servos with PWM control to the S.Bus system. The cable must be feeded between the upper and the lower half of the S.Bus terminal block. The two halves must be pressed together to close the housing and lock the cable in position. That way standard servos can be installed at any point along the length of the cable. The terminal block has an additional printed circuit board which converts the S.Bus signal to a PWM signal. The clamped terminal creates a reliable power and signal connection to the battery backer PSS 2018 (Item no. RF1660) or to the receiver. Therefor each PWM adapter needs to be allocated with a channel adress. Optionally the USB adapter CIU-2 (Item no. RF1405) combined with the PC-Link software or the S.Bus channel programmer SBC-1 (Item no. RF1696) can be used for channel programming.

Yorum Yap

Not: HTML'e dönüştürülmez!
1 5